Tripp Lite B127A-111-BHTH HDMI over Cat6 Extender Kit, Transmitter and Receiver with Repeater, 4K 60Hz, 4:4:4, IR, HDR, PoC, 230 ft., TAA

Tripp Lite B127A-111-BHTH HDMI over Cat6 Extender Kit, Transmitter and Receiver with Repeater, 4K 60Hz, 4:4:4, IR, HDR, PoC, 230 ft., TAA

  • Brand: Tripp Lite
  • Category:
  • SKU: B127A-111-BHTH
  • EAN: 0037332258618
HDMI over Cat6 Extender Kit, Transmitter and Receiver with Repeater, 4K 60Hz, 4:4:4, IR, HDR, PoC, 230 ft., TAA

Trade Prices

Distributor Product SKU Stock Updated Price
Northamber HDMI over Cat6 Extender Kit, Transmitter and Receiver with Repeater, 4K 60Hz, 4:4:4, IR, HDR, PoC, 230 ft., TAA TLCBL1297 Register free see stock
Ingram Micro HDMI OVER CAT6 EXT KIT CA89937
Memory Bank HDMI over Cat6 Extender Kit Transmitter and Receiver with Repeater 4K 60Hz 4:4:4 IR HDR PoC 230 ft. TAA B127A-111-BHTH

Related Products

Description

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BHTH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. IR remote control lets you operate the source from the display end of the installation.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-111-BHTH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the transceiver over Cat6 cable. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.

Create a Daisy Chain to Achieve Even More Distance
This extender kit is capable of forming daisy-chain installations up to 920 feet from the transmitter by connecting additional B127A-110-BH transceivers (sold separately). Up to four total B127A-110-BH transceivers can be chained together, each capable of extending a 4K/60 Hz signal up to 230 feet per unit. The transceiver is also compatible with B127A-010-H signal booster (sold separately), which allows the signal to be boosted up to 400 feet total between the transmitter and transceiver. When used in a daisy-chain installation, this brings the total extension distance up to 1,090 ft. Note
: B127A-010-H will only work when used in the first link of the daisy-chain installation.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and transceiver units work right out of the box with no software required. Mounting hardware is included for installing the transmitter on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as P568- or P569-Series). Then, connect the transceiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series cable).

TAA-Compliant for GSA Schedule Purchases
The B127A-111-BHTH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Specifications

Features
MaterialMetal
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Rack mountingYes
Consumer Electronics Control (CEC) supportYes
3DYes
Maximum refresh rate60 Hz
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance70.1 m
Audio systemMultichannel
LED indicatorsYes
Cable length1.38 m
Product colourBlack
Extended display identification data (EDID)Yes
Technical details
MaterialMetal
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Rack mountingYes
Consumer Electronics Control (CEC) supportYes
3DYes
Maximum refresh rate60 Hz
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance70.1 m
Audio systemMultichannel
Cable length1.38 m
Product colourBlack
Connectivity technologyWired
Country of originTaiwan
Master (outer) case GTIN (EAN/UPC)10037332258615
Sustainability complianceYes
Compliance certificatesCE, REACH, RoHS
Ports & interfaces
Remote (IR) output2
Remote (IR) input2
RJ-45 input ports1
RJ-45 output ports2
HDMI in1
Number of HDMI outputs2
DC-in jackYes
Connectivity technologyWired
Digital audio optical out1
Power
Input current0.6 A
Output current1 A
AC input voltage100 - 240 V
AC input frequency50-60 Hz
Operating voltage24 V
Indication
LED indicatorsYes
Operational conditions
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Receiver weight453 g
Transmitter weight453 g
Transmitter dimensions (WxDxH)62.5 x 26.9 x 115 mm
Receiver dimensions (WxDxH)62.5 x 26.9 x 115 mm
Package depth164.1 mm
Package width260.1 mm
Package height55.1 mm
Package weight660 g
Packaging data
Package depth164.1 mm
Package width260.1 mm
Package height55.1 mm
Package weight660 g
Packaging content
Mounting kitYes
Cables includedIR
AC adapter includedYes
ManualYes
Included power plug typesAU, EU, NA, UK
Logistics data
Master (outer) case width573 mm
Master (outer) case length273 mm
Master (outer) case height175 mm
Master (outer) case gross weight6.9 kg
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332258615